9/27/2023 0 Comments Telescoping projector mountThe only difficulty comes when multiple mounting holes are close together, as the arms tend to interfere with each other when positioned to match some mounting holes. If the mounting holes on your projector fall within that range, then this mount should work for you. The arms can be positioned up to 12.5 inches apart, and as close together as two inches. The mounting plate uses four adjustable arms that have offset mounting points to provide a wide range of coverage. While the mount itself can take the weight, the pivot bolts are quite thin and present a potential failure point if pushed too far.Ĭompatibility: Universal mount provides good coverage If you need to mount on a wall and hold the arm at an angle, or mount on the ceiling and position the arm at an angle, we wouldn’t recommend hanging a 30-pound projector on it. The caveat here is that this mount is designed to hold 30 pounds when hanging directly down from the ceiling. The VP02W is constructed entirely of steel, and it feels sturdy enough. The ceiling mount also has a large hole that lines up with the center of the telescoping arm, which means you can route cables through the arm and into your ceiling and wall for seamless cable management. The telescoping arm is 15 inches long when collapsed, 23 inches long when fully extended, and is hollow in design. Where the arm connects to the projector mount itself, you can achieve about 15 degrees of tilt and swivel, and also rotate the projector 360 degrees. The ceiling mount attaches to the telescoping arm, which can be folded up nearly parallel to the mounting surface or extend directly perpendicular to the mounting surface. The unit consists of three main components: the ceiling mount, a telescoping arm, and the projector mount. The steel construction feels sturdy, and three separate pivot points provide a wide range of motion. The VIVO VP02W is a utilitarian projector mount that’s built with utility in mind rather than aesthetics. We tested things like ease of installation and use, the quality of construction and included hardware, the design of the universal mount, and more.ĭesign: Basic utilitarian style fades into the background and gets the job done We recently installed a VP02W in a home theater setting to see if the impressive specifications really measure up in reality. With a telescoping height adjustment, adjustable mounting arms, and the ability to swivel, tilt, and rotate in three-axis, it’s useful in a wide range of different situations. The VIVO VP02W is a is a universal projector mount that provides a surprising deal of flexibility. Keep reading for our full product review.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |